[. . . ] When an external memory card has been inserted in the camera, all the photos/videos taken will be stored on the external memory card. To remove the card, push it in slightly to release it from the slot. The SD card must be FAT-formatted to be used with your digital camera. The formatting process may vary according to your computer operating system. [. . . ] You must install the driver before downloading pictures/videos from the camera or using it as a webcam. Make sure the camera is not connected to your computer before installing the driver and the software. When launching the "PhoTags Express" software for the first time, a registration dialog box is displayed on-screen. You can choose to register the program, skip the registration process or to stop displaying this dialog box again. NOTE: Before using this product for the first time, remove the static label from the LCD screen. Press and hold the Power/Menu button (6) until the LCD screen lights up. The camera will make a "beep" sound to confirm that it is ready for use. Press and hold the Power/Menu button (6) for about 3 seconds again to turn the camera off. The LED lights up, then the number of pictures stored in memory is shown on the LCD screen. To check the number of pictures you took, the battery level, the photo resolution and quality, press the Power/Menu button (6) once in camera Flash on In camera mode, press the Flash/SET (4) button repeatedly until the icon appears on the lower left corner of the LCD screen. Auto Flash In camera mode, press the Flash/SET (4) button repeatedly until the icon appears on the lower left corner of the LCD screen. Press the Shutter button () within seconds to delete the photo or the video. Press the Shutter button (5) again within 5 seconds to confirm the deletion of all photos and videos. Note: The camera automatically goes back to camera mode after a few seconds of inactivity. Turn off the camera, then connect it to your computer via the USB cable provided. You will hear a small "beep" sound and the LCD screen will turn on. Double-click the "DCIM" folder then the "100IMAGE" folder to display the photos and the videos stored on the memory card. Note: When you disconnect the USB cable, the camera is automatically turned off. Turn off the camera, then connect it to your computer via the USB cable provided. You will hear a small "beep" sound and the LCD screen will turn on. Select the "Removable disk" driver from the "Active Devices" list of on the left of the screen. Note: Make sure you have selected the "Removable disk" driver or you won't be able to download your pictures/videos. [. . . ] To view the real-time images taken by the webcam, go to "My Computer" and double click the new drive called "MegaCam". Put your camera in webcam mode and connect it to your computer then launch the "Webcam Express" software. Put your camera in webcam mode and connect it to your computer then launch the "Webcam Express" software. Instant messaging (chat) You can use your camera as a webcam with your instant messaging client (Yahoo Messenger, MSN Messenger, Skype. [. . . ]